| |
|
|
| Vinyle Cutters - CAMM-1 Servo GX-24 Desktop Vinyl Cutter |
 |
| CAMM-1 Servo GX-24 Desktop Vinyl Cutter |
|
CAMM-1 Servo GX-24 desktop vinyl cutter offers enhanced productivity and quality. Powered by a digital servomotor, it achieves cutting
speeds up to 20 inches per second and maximum accuracy. Vehicle graphics, signs, decals, labels, stencils and even pinstriping always
come out looking crisp and clean.
|
CAMM-1 Servo GX-24 Desktop Vinyl Cutter |
- Width: Accepts material from two to 27.5 inches wide
- Mechanical Resolution: 0.0005”
- Speed: Cutting speeds up to 20 inches per second
- Power: Max down force of 250 grams
- Optical Registration: Recognizes crop marks produced by a variety of print-only devices and automatically aligns media so that
- printed graphics can be accurately contour cut.
- Materials: Vinyl, paint mask, reflective vinyls, twill, heat transfer, and sandblast
- Roland CutStudio™ Software included
|
| F e a t u r e s |
|
| Speed & Precision |
| The CAMM-1 Servo GX-24 uses a digital servomotor to achieve maximum accuracy and cutting speeds up to 20 inches per second. The
desktop cutter also features a curve-smoothing function that allows precise cutting even at high speeds. The result is faster production
and more professional-looking graphics. |
| Materials |
| From two to 27.5 inches wide, the CAMM-1 Servo GX-24 accepts a wide range of materials. It cuts vinyl, paint mask, reflective vinyls,
twill, heat transfer, and sandblast material. |
| Cutting Printed Graphics |
| The CAMM-1 Servo GX-24 includes an optical registration system that automatically recognizes desktop printer crop marks and aligns
media to create a powerful and cost-effective print and cut solution. |
| Small & Intricate Designs |
| Blade offset values can be adjusted manually for optimum results on a wide range of materials. An optional small-lettering blade
produces sharp, hi-quality results for small and intricate designs. |
| Easy to Use |
| A newly designed blue LCD panel is perfectly positioned for easy viewing and navigation. The CAMM-1 Servo GX-24’s control panel has a
blade groove on its apron for easy manual cutting. A sheet roller base is included with every CAMM-1 Servo GX-24 to keep media feed
straight. An optional stand is also available. |
| CutStudio Software |
Every CAMM-1 Servo GX-24 vinyl cutter ships with Roland CutStudio design software. CutStudio lets users enlarge, reduce, re-position,
rotate and mirror images. It also cuts enlarged images as crisp as original size, cuts TrueType fonts without outlining, and creates
overlays by selecting individual colors for cutting. CutStudio supports BMP, JPG, STX, AI, and EPS file formats. It is compatible with
Windows 98 SE/ME/2000/XP.
The CAMM-1 Servo GX-24 works with all professional sign making software. It includes a Windows 98 SE/ME/2000/XP printer driver, a
plug-in for Adobe Illustrator 9/10/CS, a plug-in for CorelDRAW 10/11/12, and a plug-in for Adobe Illustrator 9/10/CS in the Macintosh OS
9/X environment. |
| Roland Reliability |
Roland cutters have earned worldwide reputation for reliable performance and outstanding results. Today, like all Roland products, they
come with an international ISO certification. This signals Roland’s commitment to offering top quality products backed up with first-rate
customer service and a wide variety of supplies and accessories.
Over the past 17 years, Roland has sold more than quarter million vinyl cutters worldwide. Most of them are still in production today.
Modern Image of Huntington Beach, CA still uses a Roland vinyl cutter that it purchased more than a decade ago. “It runs all day,
everyday and has never needed a single repair,” said Robert Wilson, Modern Image president. “Today, we have seven Roland’s lined up
and cranking out awesome vehicle graphics.” |
|
|
| F e a t u r e s |
|
| Model |
GX-24 |
| Driving method |
Digital control servo motor |
| Cutting method |
Media-moving method |
| Acceptable media width |
2” to 27.5” (50 to 700mm) |
| Maximum cutting area |
Width:22.9” (584mm) Length: 984” (25m) |
| Acceptable tool |
Special blade for CAMM-1 series |
| Maximum cutting speed |
20ips all directions (500mm/sec) |
| Cutting speed |
4 to 20ips (10 to 500mm/sec) |
| Blade force |
30 to 250gf |
| Mechanical resolution |
0.000492” (0.0125mm) |
| Software resolution |
0.000984” (0.025mm) |
| Distance accuracy(1) |
Error of less than +/- 0.2% of distance traveled, or +/- 0.004” (+/- .1mm), whichever is
greater |
| Repetition accuracy (1)(2) |
+/- 0.004” (+/- 0.1mm) or less |
| Alignment accuracy for printing nd cutting
when loading printed material (1) (3) |
+/- 0.04” (+/- 1mm) |
| Interface |
USB interface (compliant with Universal Serial Bus pecification Revision 1.1)
Serial (RS-232C) |
| Re-plot memory |
800KByte |
| Instruction system |
CAMM-GL III |
| Power supply |
Dedicated AC adapter
Input: AC 100 to 240 V +/- 10% 50/60 Hz 1.7A
Output:DC 24V, 2.8A |
| Power consumption |
Approx. 30W (including AC adapter) |
| Acoustic noise level during operation |
70 dB(A) or less (according to ISO 7779) |
| Acoustic noise level during standby |
40 dB(A) or less (according to ISO 7779) |
| Dimensions |
33.5” (W) X 12.2” (D) X 9.25” (H)
[851mm (W) X 310mm (D) X 235mm (H)] |
| Weight |
35 lb. (16kg) |
| Packed dimensions |
41.2” (W) X 17.75” (D) X 15.2” (H)
[1050mm(W) X 450mm (D) X 390mm (H)] |
| Packed weight |
49 lb. (22kg) |
| Environment |
Temperature: 41 to 104 degrees F, (5 to 40 degree C), humidity: 35 to 80% (no
condensation) |
| Included items |
AC adapter, power cord, blade, blade holder, separating knife, roller base, tweezers, test-
use material, application tape, USB cable, CD-ROM, user’s manual |
|
|
|
(1) According to material and cutting conditions as specified by Roland DG Corp.
(2) Excluding material expansion and contraction.
Provided that media length is less than 118” (3000mm)
(3) According to Roland DG Corp. measurement criteria:
- Using the included software from Roland Corp.
- Using a laser or ink-jet printer having a resolution of 720dpi or better.
- Excluding glossy or laminated material
- Excluding effects of printing distortion due to printer precision and effects of material expansion, contraction, or warping.
- Depending on the ink (black) employed by the printer used, correct sensing may not be possible.
|
| |
|
|
|
|
|
